Affiliate Disclosure: As an Amazon Associate we earn from qualifying purchases. Some links may earn us a commission at no cost to you.
Best GPU for Star Wars Outlaws (2026): 5 Picks by Tier
The best GPU for Star Wars Outlaws is the RTX 5070 Ti. In TechPowerUp's native Ultra testing, the RTX 4080, a card the 5070 Ti runs within a few percent of, averaged 84 FPS at 1440p. That is where this game is happiest.
Outlaws is heavier than it looks. Its Snowdrop engine runs ray-traced lighting on every preset, Radeon trails NVIDIA by about a tier, and 12 GB cards lose extra ground at 4K. The picks below are sorted by the resolution you play at.
Our top pick: ASUS TUF RTX 5070 Ti OC
The 5070 Ti keeps native 1440p Ultra in the low 80s with the game's ray tracing on, and its 16 GB pool avoids the 4K slowdown that hits 12 GB cards. The ASUS TUF OC is the build we'd buy for its cooler and board quality.
Quick picks
Pick | Card | Best for | Buy |
|---|---|---|---|
Best Overall | 1440p Ultra at high refresh, 4K with DLSS | ||
Best Value | 1440p Ultra at 60 FPS and up, FSR for more | ||
Best Premium | 4K Ultra with DLSS | ||
Best Budget | 1080p Ultra, 1440p High with FSR | ||
Editor's Pick | 1080p Ultra and 1440p High with DLSS |
Best Overall
- Card
- Best for
1440p Ultra at high refresh, 4K with DLSS
- Buy
Best Value
- Card
- Best for
1440p Ultra at 60 FPS and up, FSR for more
- Buy
Best Premium
- Card
- Best for
4K Ultra with DLSS
- Buy
Best Budget
- Card
- Best for
1080p Ultra, 1440p High with FSR
- Buy
Editor's Pick
- Card
- Best for
1080p Ultra and 1440p High with DLSS
- Buy
Specs at a glance
Card | VRAM | Memory bus | Board power | Interface | Target resolution |
|---|---|---|---|---|---|
16 GB GDDR7 | 256-bit | 300 W | PCIe 5.0 x16 | 1440p | |
16 GB GDDR6 | 256-bit | 304 W | PCIe 5.0 x16 | 1440p | |
16 GB GDDR7 (30 Gbps) | 256-bit | 360 W | PCIe 5.0 x16 | 4K | |
16 GB GDDR6 | 128-bit | 160 W | PCIe 5.0 x16 | 1080p | |
16 GB GDDR7 | 128-bit | 180 W | PCIe 5.0 x8 | 1080p |
- VRAM
16 GB GDDR7
- Memory bus
256-bit
- Board power
300 W
- Interface
PCIe 5.0 x16
- Target resolution
1440p
- VRAM
16 GB GDDR6
- Memory bus
256-bit
- Board power
304 W
- Interface
PCIe 5.0 x16
- Target resolution
1440p
- VRAM
16 GB GDDR7 (30 Gbps)
- Memory bus
256-bit
- Board power
360 W
- Interface
PCIe 5.0 x16
- Target resolution
4K
- VRAM
16 GB GDDR6
- Memory bus
128-bit
- Board power
160 W
- Interface
PCIe 5.0 x16
- Target resolution
1080p
- VRAM
16 GB GDDR7
- Memory bus
128-bit
- Board power
180 W
- Interface
PCIe 5.0 x8
- Target resolution
1080p
Benchmarks
Average FPS at the Ultra preset, native resolution, on a Ryzen 7 9700X test system. Current cards map to these tiers as described below the charts.
- 163.2 FPS
- 127.3 FPS
- 125.4 FPS
- 109.6 FPS
- 109.1 FPS
- 95 FPS
- 73.4 FPS
- 62.7 FPS
- 42.3 FPS
Average FPS at the Ultra preset, native resolution, on a Ryzen 7 9700X test system. Current cards map to these tiers as described below the charts.
- 112.8 FPS
- 86.2 FPS
- 84.3 FPS
- 75.8 FPS
- 71.8 FPS
- 61.8 FPS
- 49.1 FPS
- 40 FPS
- 27.6 FPS
Average FPS at the Ultra preset, native resolution, on a Ryzen 7 9700X test system. Current cards map to these tiers as described below the charts.
- 61.4 FPS
- 45.2 FPS
- 44.5 FPS
- 40.1 FPS
- 35.9 FPS
- 25.2 FPS
- 25.3 FPS
- 12.8 FPS
- 13.8 FPS
None of the current cards appear in these charts directly, because TechPowerUp's Outlaws test predates them. Read the rows by tier instead. In TechPowerUp's relative performance averages, the RTX 5070 Ti lands within a few percent of the RTX 4080, the RTX 5080 runs ahead of the RTX 4080 Super, and both 16 GB budget cards sit just above the RTX 4060 Ti 16GB. The RX 9070 XT's average puts it between the RTX 4070 Ti Super and the RTX 4080, but this game favors NVIDIA, so plan on the low 70s at 1440p rather than the 80s.
Two patterns in the data matter more than any single row. The RX 7900 XTX, which matches the RTX 4080 across TechPowerUp's wider test suite, finished about 10% behind it here. And at 4K the 12 GB RTX 4070 Ti managed 28 FPS while the 16 GB RTX 4070 Ti Super reached 36, a far wider gap than the two cards show elsewhere. That is the VRAM cliff in this game, and it only shows up at 4K.
How we picked a GPU for Star Wars Outlaws
Ubisoft's spec sheet starts with a GTX 1660, RX 5600 XT or Arc A750 for 1080p at 30 FPS on Low. The recommended tier is an RTX 3060 or RX 6700 XT for 1080p at 60 FPS on High, and the 4K Ultra tier names an RTX 4080 or RX 7900 XTX. Every one of those tiers assumes an upscaler set to Quality, so they undersell what native Ultra really costs.
We sorted the picks by monitor resolution and set the bar at 60 FPS or better at native Ultra, with upscaling treated as headroom rather than a crutch. That gives one card per tier for 1080p, 1440p and 4K, plus a Radeon value pick and an NVIDIA budget pick. For the wider ladder across more games, our guide to choosing a GPU and monitor walks the same tiers.
Ray tracing shapes every recommendation here. Outlaws runs ray-traced lighting on all presets and the setting cannot be switched off, so there is no raster-only mode to fall back on. That is why NVIDIA cards punch above their averages, and why DLSS frame generation is worth having once your base frame rate clears 60.
Every pick carries 16 GB. The 8 GB and 16 GB RTX 4060 Ti ran within a frame of each other at every resolution in TechPowerUp's test, so capacity is not what limits a budget card at 1080p. The 4K numbers are where small pools hurt, and our 16 GB VRAM verdict covers why 8 GB cards are a poor buy in 2026.
Best Overall: ASUS TUF RTX 5070 Ti OC
Specs
Chip | GeForce RTX 5070 Ti |
VRAM | 16 GB GDDR7 |
Memory bus | 256-bit |
Board power | 300 W |
Interface | PCIe 5.0 x16 |
Slot width | 3.125-slot |
Outputs | HDMI 2.1, DisplayPort 2.1 |
Chip
GeForce RTX 5070 Ti
VRAM
16 GB GDDR7
Memory bus
256-bit
Board power
300 W
Interface
PCIe 5.0 x16
Slot width
3.125-slot
Outputs
HDMI 2.1, DisplayPort 2.1
What it does well
The RTX 5070 Ti is the card that keeps 1440p Ultra above 80 FPS in Outlaws with no upscaling. The RTX 4080 it trades blows with averaged 84 FPS at 1440p and 125 FPS at 1080p in TechPowerUp's run, so DLSS Quality is enough to feed a 120 Hz 1440p panel through the busiest city streets.
Native 4K lands in the mid 40s on this class of card, which makes 4K a DLSS resolution here. The 16 GB of GDDR7 on a 256-bit bus is what keeps the card clear of the 12 GB slowdown at 4K, and DLSS frame generation pushes a high-refresh panel further once the base frame rate sits above 60.
What you give up
Size is the catch. The TUF OC is a 3.125-slot card, and that thickness rules out a lot of compact cases and can crowd the M.2 heatsink under the first PCIe slot on some boards. Measure before you order.
It also pulls around 300 W, so pair it with a quality 750 W power supply. The TUF cooler costs more than plainer 5070 Ti models, and in a small case a slimmer board with the same chip is the smarter buy.
Who it's for
If you play on a 1440p monitor at 120 Hz or higher and want Ultra in a game where ray tracing is always on, this is the card. It also covers 4K at 60 FPS with DLSS for anyone planning to move up a resolution later. Our 1440p GPU guide ranks the same chip across a broader slate of games.
Best Value: ASUS Prime RX 9070 XT OC
Specs
Chip | Radeon RX 9070 XT |
VRAM | 16 GB GDDR6 |
Memory bus | 256-bit |
Board power | 304 W |
Interface | PCIe 5.0 x16 |
Slot width | 2.5-slot |
BIOS | Dual BIOS |
Chip
Radeon RX 9070 XT
VRAM
16 GB GDDR6
Memory bus
256-bit
Board power
304 W
Interface
PCIe 5.0 x16
Slot width
2.5-slot
BIOS
Dual BIOS
What it does well
The RX 9070 XT is the Radeon card that clears 60 FPS at native 1440p Ultra in Outlaws. Its TechPowerUp average sits between the RTX 4070 Ti Super (72 FPS at 1440p) and the RTX 4080 (84 FPS), and after the game's NVIDIA lean that still works out to the low 70s.
RDNA 4's ray tracing is a real step up over the RX 7000 cards, which matters in a game that never turns RT off. You get 16 GB of GDDR6 on a 256-bit bus, and the ASUS Prime is a 2.5-slot design with dual BIOS, so it fits cases the TUF 5070 Ti will not.
What you give up
Outlaws is one of the games where Radeon gives ground. The RX 7900 XTX finished about 10% behind the RTX 4080 here despite matching it on average, so the 9070 XT lands a tier lower than its raster numbers suggest.
You also give up DLSS. FSR covers upscaling and frame generation, but DLSS holds up better at low internal resolutions. Board power is 304 W, so budget a 750 W unit here too.
Who it's for
If you play at 1440p, lean AMD, and are happy with 60 to 75 FPS at Ultra before upscaling, buy the 9070 XT. It suits builders who want a smaller card than the TUF and a 16 GB pool for the games that come next.
Best Premium: MSI RTX 5080 Inspire 3X OC
Specs
Chip | GeForce RTX 5080 |
VRAM | 16 GB GDDR7 (30 Gbps) |
Memory bus | 256-bit |
Board power | 360 W |
Interface | PCIe 5.0 x16 |
Cooler | Triple STORMFORCE fans |
Outputs | HDMI 2.1b, DisplayPort 2.1b |
Chip
GeForce RTX 5080
VRAM
16 GB GDDR7 (30 Gbps)
Memory bus
256-bit
Board power
360 W
Interface
PCIe 5.0 x16
Cooler
Triple STORMFORCE fans
Outputs
HDMI 2.1b, DisplayPort 2.1b
What it does well
4K is where the 5080 earns its place. It runs ahead of the RTX 4080 Super in TechPowerUp's averages, and the 4080 Super managed 45 FPS at native 4K Ultra in Outlaws. DLSS Quality is what lifts it past a locked 60, and DLSS frame generation pushes it toward a 4K 120 Hz panel.
The MSI Inspire 3X OC pairs a triple-fan cooler with 16 GB of 30 Gbps GDDR7 on a 256-bit bus. At 1440p the card is more than this game needs, since the 4080 Super class already clears 85 FPS natively there.
What you give up
It carries the same 16 GB as the 5070 Ti, and the speed step between the two is modest next to the gap in what they cost. Native 4K Ultra at 60 FPS is out of reach without upscaling; in TechPowerUp's run only the RTX 4090 got there, at 61 FPS.
Buying one is the other hassle. RTX 5080 listings on Amazon are almost all third-party or import sellers right now, and this one ships from Amazon's German store, so check who sells and ships it before you buy. Power draw is rated at 360 W, and NVIDIA recommends an 850 W supply.
Who it's for
If you own a 4K monitor at 120 Hz or higher and want Ultra with DLSS as your default, buy the 5080. Our 4K GPU guide covers where it sits against the RTX 5090. On a 1440p screen, buy the 5070 Ti instead.
Best Budget: ASUS Dual RX 9060 XT (16 GB)
Specs
Chip | Radeon RX 9060 XT |
VRAM | 16 GB GDDR6 |
Memory bus | 128-bit |
Board power | 160 W |
Interface | PCIe 5.0 x16 |
Slot width | 2.5-slot |
Fans | 0dB idle fan stop |
Chip
Radeon RX 9060 XT
VRAM
16 GB GDDR6
Memory bus
128-bit
Board power
160 W
Interface
PCIe 5.0 x16
Slot width
2.5-slot
Fans
0dB idle fan stop
What it does well
The RX 9060 XT 16GB is the budget card that holds 60 FPS at native 1080p Ultra. It runs a little ahead of the RTX 4060 Ti 16GB in TechPowerUp's averages, and that card managed 63 FPS at 1080p Ultra in Outlaws, with ray tracing on.
The 16 GB pool is the long-term value. It clears every VRAM line on Ubisoft's spec sheet, and at 160 W of board power a quality 550 W supply covers it with margin.
What you give up
The 128-bit bus is the ceiling. The 4060 Ti 16GB posted 40 FPS at native 1440p Ultra, so on this class of card 1440p means dropping to High and turning on FSR. 4K is not a realistic target.
Watch the listing. The 9060 XT also ships in an 8 GB version with a near-identical name, and reports suggest buyers grab it by mistake. Confirm 16 GB in the title before you check out.
Who it's for
If you play on a 1080p monitor at 60 to 100 Hz and want Ultra on a budget, the 9060 XT is the one to get. Our 1080p GPU guide covers the same tier for high-refresh panels.
Editor's Pick: ASUS Dual RTX 5060 Ti OC (16 GB)
Specs
Chip | GeForce RTX 5060 Ti |
VRAM | 16 GB GDDR7 |
Memory bus | 128-bit |
Board power | 180 W |
Interface | PCIe 5.0 x8 |
Slot width | 2.5-slot |
BIOS | Dual BIOS |
Chip
GeForce RTX 5060 Ti
VRAM
16 GB GDDR7
Memory bus
128-bit
Board power
180 W
Interface
PCIe 5.0 x8
Slot width
2.5-slot
BIOS
Dual BIOS
What it does well
This is the NVIDIA route at the budget tier, and Outlaws rewards it. The RTX 5060 Ti 16GB runs slightly quicker than the RX 9060 XT 16GB in TechPowerUp's averages, NVIDIA's ray tracing lead helps in a game that never turns RT off, and DLSS upscaling plus frame generation are both supported.
That toolkit makes 1440p High with DLSS Quality a comfortable target, and 1080p Ultra stays above 60 FPS. The ASUS Dual OC is a 2.5-slot card with dual BIOS and a 180 W power rating.
What you give up
The card runs on PCIe 5.0 x8 lanes. On an older PCIe 3.0 board it gets half the bandwidth of a full x16 link, and reports suggest the 16 GB version hides most of that loss, but it is worth knowing before you drop it into an older system.
It shares the 9060 XT's 128-bit bus, so native 1440p Ultra still sits well below 60 FPS. An 8 GB version uses almost the same name, so check the listing for 16 GB.
Who it's for
If you play at 1080p high refresh or entry 1440p and want DLSS in your toolkit, buy this over the 9060 XT. Players moving on to Star Wars Zero Company or other DLSS-heavy games like Alan Wake 2 get more use out of it.
Bottom line
If you play Outlaws at 1440p and want Ultra at high refresh, buy the ASUS TUF RTX 5070 Ti OC. If you play at 1440p and lean AMD, buy the ASUS Prime RX 9070 XT OC. If you game at 4K and want Ultra with DLSS as the default, buy the MSI RTX 5080 Inspire 3X OC. If you play at 1080p on a budget, buy the ASUS Dual RX 9060 XT (16 GB), or the ASUS Dual RTX 5060 Ti OC (16 GB) if you want DLSS.
FAQ
What GPU do you need to run Star Wars Outlaws?
Ubisoft's minimum is a GTX 1660, RX 5600 XT or Arc A750 for 1080p at 30 FPS on Low, and the recommended tier is an RTX 3060 or RX 6700 XT for 1080p at 60 FPS on High, both with upscaling on. For native Ultra at 60 FPS or better, plan on an RX 9060 XT 16GB or RTX 5060 Ti 16GB at 1080p, an RTX 5070 Ti or RX 9070 XT at 1440p, and an RTX 5080 with DLSS at 4K.
How much VRAM does Star Wars Outlaws need?
At 1080p and 1440p, capacity is not the limit: TechPowerUp measured the 8 GB and 16 GB RTX 4060 Ti within a frame of each other at every resolution. At 4K it matters. The 12 GB RTX 4070 Ti fell to 28 FPS while the 16 GB RTX 4070 Ti Super held 36, a much wider gap than the two cards show in other games. Buy 16 GB if 4K is on your plan.
Can you turn off ray tracing in Star Wars Outlaws?
No. Outlaws uses ray-traced lighting, shadows and reflections on every preset, and the game offers no way to switch it off. What you can change is how much extra RT you add, up to NVIDIA's RTX Dynamic Illumination at the top end. That fixed RT cost is a big reason NVIDIA cards run ahead of their usual averages here.
Is the RTX 5070 enough for Star Wars Outlaws?
At 1440p, yes. The RTX 5070 runs a little ahead of the RTX 4070 Super, which averaged 62 FPS at native 1440p Ultra, so expect the mid 60s before DLSS. At 4K its 12 GB is the problem: 12 GB cards drop off harder than their speed suggests at 4K Ultra in this game. For 4K, or to keep 1440p headroom for later games, the 16 GB RTX 5070 Ti is the better buy.
Does Star Wars Outlaws run better on AMD or NVIDIA?
NVIDIA. TechPowerUp measured the RX 7900 XTX about 10% behind the RTX 4080 at 1440p Ultra, even though the two cards match across the wider test suite. Always-on ray tracing and DLSS both work in NVIDIA's favor. Radeon is still a solid buy here: the RX 9070 XT clears 60 FPS at native 1440p Ultra, and the RX 9060 XT 16GB holds 60 at 1080p.
What GPU do you need for Star Wars Outlaws at 4K?
Ubisoft lists an RTX 4080 or RX 7900 XTX for 4K at 60 FPS on Ultra with upscaling on. In TechPowerUp's native test only the RTX 4090 cleared 60 FPS at 4K Ultra, so treat 4K as a DLSS resolution. An RTX 5080 with DLSS Quality holds 60 or better, and the RTX 5070 Ti sits right around 60 with DLSS Quality.
Related Articles
Best GPUs for Star Wars Zero Company (2026): Picks by Tier
Star Wars Zero Company is a light, turn-based tactics game. The best GPUs by tier, why a midrange card is plenty, and where it's wasteful to overspend.
Jun 17, 2026
Best GPUs for Alan Wake 2 (2026): Picks by Path Tracing Tier
Best GPUs for Alan Wake 2 in 2026, picked by Path Tracing tier — from the 1080p mesh-shader floor to 4K Full PT with DLSS 4 Multi Frame Gen.
May 15, 2026
Best GPU for Assassin's Creed Shadows (2026): 5 Picks
The best GPU for Assassin's Creed Shadows is an RX 9070 XT. Five picks from 1080p to 4K with measured FPS, the ray tracing modes, and how much VRAM you need.
Oct 21, 2026
Best GPU for 1440p Gaming 2026: 5 16GB Picks, 144-240Hz
The best GPU for 1440p gaming in 2026: five 16GB picks matched to 144 and 240 Hz targets, the 8GB cards to skip, and the benchmarks behind every call.
Sep 26, 2026
Is 16GB VRAM Enough in 2026? 1440p, 4K and 24GB Verdict
Is 16GB VRAM enough in 2026? Yes for 1440p ultra and nearly all 4K. Only 4K path tracing breaks it. See which games exceed 16GB and when 24GB is worth it.
Oct 5, 2026