Affiliate Disclosure: As an Amazon Associate we earn from qualifying purchases. Some links may earn us a commission at no cost to you.

Best GPUs for Silent Hill 2 Remake (2026): 5 Picks
The graphics card to buy for Silent Hill 2 Remake is the ASUS TUF RTX 5070 Ti OC. It is the lowest tier that holds above 60 fps at 1440p on the Epic preset without upscaling, and its 16 GB of memory leaves room to spare.
The official spec sheet points you lower than that. Its recommended RTX 2080 or RX 6800 XT is rated for 60 fps at 1080p on Medium, and this Unreal Engine 5 remake runs noticeably better on NVIDIA than on Radeon. The picks below are tiered by what each card does at native resolution, then with DLSS or FSR.
Our top pick: ASUS TUF RTX 5070 Ti OC
The ASUS TUF RTX 5070 Ti OC runs an estimated 71 fps at 1440p Epic natively, the first current card to clear 60 there, so DLSS becomes headroom rather than a requirement.

Quick picks
Pick | Card | Target | Buy |
|---|---|---|---|
Best Overall | 1440p Epic at a native 60+ | ||
Best Value | 1440p with DLSS Quality | ||
Best Premium | 4K with DLSS Quality | ||
Best Budget | 1080p Epic with DLSS | ||
Editor's Pick | Radeon pick, 16 GB |
Best Overall
- Card
- Target
1440p Epic at a native 60+
- Buy
Best Value
- Card
- Target
1440p with DLSS Quality
- Buy
Best Premium
- Card
- Target
4K with DLSS Quality
- Buy
Best Budget
- Card
- Target
1080p Epic with DLSS
- Buy
Editor's Pick
- Card
- Target
Radeon pick, 16 GB
- Buy
Specs at a glance
Card | Memory | 1440p Epic (est.) | Power |
|---|---|---|---|
16 GB GDDR7, 256-bit bus | 71 fps | Approximately 300W | |
12 GB GDDR7, 192-bit bus | 57 fps | Approximately 250W | |
16 GB GDDR7, 256-bit bus | 79 fps | Approximately 360W | |
16 GB GDDR7, 128-bit bus | 42 fps | Approximately 180W | |
16 GB GDDR6, 256-bit bus | 53 fps | Approximately 304W |
- Memory
16 GB GDDR7, 256-bit bus
- 1440p Epic (est.)
71 fps
- Power
Approximately 300W
- Memory
12 GB GDDR7, 192-bit bus
- 1440p Epic (est.)
57 fps
- Power
Approximately 250W
- Memory
16 GB GDDR7, 256-bit bus
- 1440p Epic (est.)
79 fps
- Power
Approximately 360W
- Memory
16 GB GDDR7, 128-bit bus
- 1440p Epic (est.)
42 fps
- Power
Approximately 180W
- Memory
16 GB GDDR6, 256-bit bus
- 1440p Epic (est.)
53 fps
- Power
Approximately 304W
What the official specs miss
Konami's recommended tier lists an RTX 2080 or RX 6800 XT with 16 GB of system memory, aimed at 60 fps on Medium or 30 fps on High at 1080p. The minimum tier, a GTX 1080 or RX 5700, targets 30 fps at 1080p on Low. None of it describes 1440p on Epic, which is how most people buying a new card want to play.
Launch testing shows how far off that is. The RX 6800 XT measured about 50 fps at 1080p Epic and about 35 fps at 1440p Epic. Hitting a native 60 at 1080p Epic took an RTX 3080, RX 7900 GRE or RTX 4070. At 1440p, the RTX 4080 was the first card past 70.
The pairing is also lopsided. A GeForce and a Radeon that trade blows in most games do not here. The RX 7900 XTX finished roughly 23 percent behind the RTX 4080 at 1440p in the same test, so a Radeon card lands about one tier lower in Silent Hill 2 than its usual standing suggests.
Benchmarks
These are PCBH FPS calculator estimates on the Epic preset at native resolution, with no upscaling. No published test covers RTX 50 series or RX 9000 cards in this game at launch settings, so each figure scales a measured launch result (RTX 4080 for GeForce, RX 7900 XTX for Radeon) by the card's relative performance. Treat them as a guide to tiers, not exact frame counts.
Average FPS at 1080p on the Epic preset, no upscaling.
- RTX 508099 FPS
- RTX 5070 Ti90 FPS
- RTX 507075 FPS
- RX 9070 XT75 FPS
- RTX 5060 Ti 16GB56 FPS
Average FPS at 1440p on the Epic preset, no upscaling.
- RTX 508079 FPS
- RTX 5070 Ti71 FPS
- RTX 507057 FPS
- RX 9070 XT53 FPS
- RTX 5060 Ti 16GB42 FPS
Average FPS at 4K on the Epic preset, no upscaling.
- RTX 508047 FPS
- RTX 5070 Ti41 FPS
- RTX 507032 FPS
- RX 9070 XT29 FPS
- RTX 5060 Ti 16GB23 FPS
How we picked
Native 1440p Epic came first. A card either renders 60 fps there on its own or it needs upscaling, and that line splits our Best Overall from the cheaper picks. We tiered the rest by how much DLSS or FSR they need to reach 60 at their target resolution.
Vendor came second. Because Radeon trails its usual tier in this engine, we did not rank cards by their general reputation. The RX 9070 XT is a stronger card than the RTX 5070 in most games, yet the two land close together here, and we priced that into the picks.
VRAM came third. Launch testing measured the game using just under 10 GB at 4K and about 7 GB at the lowest preset. Eight gigabytes is tight above 1080p Epic, 12 GB is comfortable, and 16 GB is headroom for later UE5 games. For a wider view of how we match cards to monitors, see our guide to choosing a GPU and display.
Best Overall: ASUS TUF RTX 5070 Ti OC

Specs
GPU | RTX 5070 Ti |
Memory | 16 GB GDDR7, 256-bit bus |
Boost clock | 2,610 MHz (OC mode) |
Cooler | Triple-fan, 3.125-slot |
Interface | PCIe 5.0 |
Outputs | 3x DisplayPort 2.1a, 2x HDMI 2.1b |
TGP | Approximately 300W |
GPU
RTX 5070 Ti
Memory
16 GB GDDR7, 256-bit bus
Boost clock
2,610 MHz (OC mode)
Cooler
Triple-fan, 3.125-slot
Interface
PCIe 5.0
Outputs
3x DisplayPort 2.1a, 2x HDMI 2.1b
TGP
Approximately 300W
What it does well
The RTX 5070 Ti is the cleanest answer to this game. Our estimate puts it at 71 fps at 1440p Epic natively and around 90 fps at 1080p, so a 144 Hz monitor gets real frames rather than upscaled ones. Switch on DLSS Quality and you have room to try hardware Lumen ray tracing at 1440p without dropping under 60.
Sixteen gigabytes of GDDR7 on a 256-bit bus sits well past the roughly 10 GB the game uses at 4K. Memory is not part of the conversation on this card, now or for the next few UE5 releases.
The TUF cooler is the overbuilt version of the chip. Three axial fans and a thick fin stack keep it quiet in long sessions, which matters in a game where the soundtrack and ambient audio carry half the dread.
What you give up
No graphics card removes the traversal stutter. The game pauses for a split second when it streams in a new area, and reviewers flagged it on every GPU they tested. A faster card shortens the hitch; it does not delete it.
4K native sits around 41 fps, so 4K means DLSS Performance or Balanced. The card is also 3.125 slots thick, so check your case clearance before ordering.
Who it's for
The 1440p player on a 144 Hz or 165 Hz monitor who wants Epic settings at a native frame rate, and anyone who wants one card that also handles the next few demanding UE5 releases.
Best Value: ASUS Prime RTX 5070 OC

Specs
GPU | RTX 5070 |
Memory | 12 GB GDDR7, 192-bit bus |
CUDA cores | 6,144 |
Boost clock | 2,512 MHz (reference) |
Cooler | Triple-fan, 2.5-slot, SFF-Ready |
Interface | PCIe 5.0 |
TGP | Approximately 250W |
GPU
RTX 5070
Memory
12 GB GDDR7, 192-bit bus
CUDA cores
6,144
Boost clock
2,512 MHz (reference)
Cooler
Triple-fan, 2.5-slot, SFF-Ready
Interface
PCIe 5.0
TGP
Approximately 250W
What it does well
In Silent Hill 2, the RTX 5070 performs close to the RX 9070 XT. Our estimate has it at about 57 fps at 1440p Epic natively and about 75 fps at 1080p. DLSS Quality lifts 1440p comfortably past 60, and DLSS 4 is the strongest upscaler in the game's settings menu.
The Prime OC is a 2.5-slot, SFF-Ready board, which makes it the easiest card on this list to fit into a compact case. Board power runs around 250W, so a quality 650W unit covers most builds.
What you give up
Native 1440p lands in the high 50s, so you will lean on DLSS to hold 60 in the heavier outdoor sections. 4K is a stretch: around 32 fps natively, which means DLSS Performance and lower shadows to get near 60.
Twelve gigabytes covers this game, which peaks just under 10 GB at 4K. It leaves less headroom than the 16 GB cards for future UE5 titles, which is the main reason it sits in the value slot rather than the top one.
Who it's for
The 1440p player on a 60 Hz to 100 Hz monitor who is happy to run DLSS Quality, or a 1080p player who wants Epic settings with frames to spare.
Best Premium: ASUS TUF RTX 5080 OC

Specs
GPU | RTX 5080 |
Memory | 16 GB GDDR7, 256-bit bus |
CUDA cores | 10,752 |
Boost clock | 2,730 MHz (OC mode) |
Cooler | Triple-fan, 3.6-slot |
Interface | PCIe 5.0 |
TGP | Approximately 360W |
GPU
RTX 5080
Memory
16 GB GDDR7, 256-bit bus
CUDA cores
10,752
Boost clock
2,730 MHz (OC mode)
Cooler
Triple-fan, 3.6-slot
Interface
PCIe 5.0
TGP
Approximately 360W
What it does well
The RTX 5080 is the card for 4K. Our estimate is about 47 fps at 4K Epic natively, and DLSS Quality brings that to around 60. The game's fog, film grain and dark interiors are where a 4K OLED pays off, and this is the tier that makes that setup work.
At 1440p it runs an estimated 79 fps natively, leaving enough headroom to run hardware Lumen ray tracing with DLSS and stay above 60. It also has 16 GB, matching the 5070 Ti.
What you give up
Even the RTX 5080 does not hold 4K 60 natively on Epic. At 1440p, the gap over the RTX 5070 Ti is roughly 10 percent in our estimates, so the extra money only makes sense if you play at 4K.
The card is 3.6 slots thick and draws around 360W. Plan the case and power supply around it.
Who it's for
The player on a 4K TV or 4K 120 Hz monitor who wants Silent Hill 2 at Epic with DLSS Quality, and possibly ray tracing.
Best Budget: MSI Ventus RTX 5060 Ti 16G OC

Specs
GPU | RTX 5060 Ti |
Memory | 16 GB GDDR7, 128-bit bus |
CUDA cores | 4,608 |
Cooler | Dual-fan Ventus 2X |
Interface | PCIe 5.0 x8 |
Outputs | HDMI 2.1b, DisplayPort 2.1b |
TGP | Approximately 180W |
GPU
RTX 5060 Ti
Memory
16 GB GDDR7, 128-bit bus
CUDA cores
4,608
Cooler
Dual-fan Ventus 2X
Interface
PCIe 5.0 x8
Outputs
HDMI 2.1b, DisplayPort 2.1b
TGP
Approximately 180W
What it does well
The RTX 5060 Ti 16GB is the cheapest card here with enough memory for this game at every resolution. Our estimate is about 56 fps at 1080p Epic natively, and DLSS Quality takes it past 60 with room left over.
The 16 GB pool matters more than the chip. It clears the roughly 10 GB the game can use at high resolutions, so texture quality stays on Epic even when you drop other settings. MSI's Ventus 2X is a compact dual-fan card that draws around 180W.
What you give up
1440p Epic natively sits in the low 40s. Playing at 1440p means DLSS Balanced plus lower shadow and reflection settings. The card runs on PCIe 5.0 x8, which costs a few percent on older PCIe 3.0 boards.
Watch the listing. Buyers have flagged that RTX 5060 Ti searches mix 8 GB and 16 GB cards with near-identical names, and the 8 GB version is a step down in this game. Buy the 16G model.
Who it's for
The 1080p player who wants Epic settings at 60 fps, or a budget 1440p player comfortable tuning settings.
Editor's Pick: Sapphire Pulse RX 9070 XT

Specs
GPU | RX 9070 XT |
Memory | 16 GB GDDR6, 256-bit bus |
Boost clock | 2,970 MHz |
Cooler | Triple-fan Pulse |
Interface | PCIe 5.0 |
Outputs | 2x HDMI, 2x DisplayPort |
Board power | Approximately 304W |
GPU
RX 9070 XT
Memory
16 GB GDDR6, 256-bit bus
Boost clock
2,970 MHz
Cooler
Triple-fan Pulse
Interface
PCIe 5.0
Outputs
2x HDMI, 2x DisplayPort
Board power
Approximately 304W
What it does well
This is the pick for Radeon buyers. The RX 9070 XT brings 16 GB of GDDR6 and AMD's newer FSR 4 upscaler, which is a clear step up in image quality over FSR 3 in the games that support it. Across most new releases it runs with the RTX 5070 Ti.
The Sapphire Pulse is the plain, well-cooled version of the chip: a triple-fan board without RGB that runs quietly at stock clocks.
What you give up
Silent Hill 2 is one of the games where Radeon falls behind. Scaled from launch results, our estimate puts it at about 53 fps at 1440p Epic and about 75 fps at 1080p, level with the RTX 5070 rather than the 5070 Ti. If this is the main game you are buying for, the GeForce picks return more frames.
Board power is around 304W, close to the RTX 5070 Ti, so it saves nothing on the power supply.
Who it's for
The player who wants a Radeon card for its 16 GB and plays a wide mix of games, where it is usually the stronger buy, and accepts a weaker showing in this one. Our RTX 5070 vs RX 9070 XT comparison covers the wider picture.
Stutter, upscaling and settings per tier
The traversal stutter is engine-side. You will feel a short hitch at some doorways and area transitions on any card, and the game also compiles shaders on first launch, so let that finish before judging smoothness. Players have reported that a fast NVMe drive and a strong CPU shorten these hitches more than a faster GPU does.
Upscaling is the main lever here, since the game launched without frame generation. DLSS Quality is close to native at 1440p and above; see our DLSS vs FSR breakdown for how the two compare. Hardware Lumen ray tracing costs a lot indoors for a modest visual gain in many rooms, so leave it off below the RTX 5080 tier.
When you need frames, lower shadow and reflection quality first. They cost the most and change the look the least. Keep textures on Epic on every card with 12 GB or more. For other demanding UE5 games tiered the same way, see our picks for Stalker 2 and Alan Wake 2.
Bottom line
If you play at 1440p and want Epic settings at a native 60 or better, buy the ASUS TUF RTX 5070 Ti OC.
If you are fine running DLSS Quality at 1440p, the ASUS Prime RTX 5070 OC gets you there for less. For 4K, the ASUS TUF RTX 5080 OC with DLSS Quality is the card. On a 1080p budget, buy the MSI Ventus RTX 5060 Ti 16G OC, and skip the 8 GB version. If you want Radeon for the rest of your library, the Sapphire Pulse RX 9070 XT is the pick, with lower numbers in this game.
FAQ
What GPU do you need for Silent Hill 2 Remake?
For 1080p on the Epic preset, an RTX 5060 Ti 16GB with DLSS Quality holds 60 fps in our estimates. For 1440p Epic at a native 60, the RTX 5070 Ti is the lowest current card that gets there. For 4K, the RTX 5080 with DLSS Quality is our pick. The official recommended RTX 2080 or RX 6800 XT is rated for 1080p at 60 fps on Medium, not Epic.
Why does Silent Hill 2 Remake stutter even on a fast GPU?
Most of the hitching comes from the engine streaming in new areas, which shows up as a split-second pause at some transitions on every card. The game also compiles shaders on first launch, so let that finish. A faster GPU shortens the hitches but does not remove them, so do not buy a bigger card to fix stutter alone.
How much VRAM does Silent Hill 2 Remake need?
Launch testing measured just under 10 GB at 4K and about 7 GB on the lowest preset. Eight gigabytes is tight above 1080p Epic, 12 GB is comfortable at 1440p, and 16 GB leaves room for later Unreal Engine 5 games. That is why our budget pick is the 16 GB RTX 5060 Ti rather than the 8 GB version.
Can you run Silent Hill 2 Remake at 4K 60 fps?
Not natively on Epic with any card on this list. The RTX 5080 lands around 47 fps at 4K Epic in our estimates, and DLSS Quality brings it to around 60. The RTX 5070 Ti gets there with DLSS Performance. Lowering shadows and reflections adds a little more headroom without changing the look much.
Is ray tracing worth turning on in Silent Hill 2 Remake?
Only on the faster cards. Hardware Lumen ray tracing costs a lot of performance indoors, and in many rooms the visual gain is modest. On an RTX 5080, or an RTX 5070 Ti at 1440p with DLSS, it is worth trying. Below that tier, spend the frames on resolution and a steady 60 instead.
Does Silent Hill 2 Remake run better on NVIDIA or AMD?
NVIDIA. In launch testing the RX 7900 XTX finished roughly 23 percent behind the RTX 4080 at 1440p, a bigger gap than those cards show in most games. Our estimates put the RX 9070 XT level with the RTX 5070 here. Radeon cards are still good buys for a wider game library, but for this game alone the GeForce picks return more frames.
Related Articles

Best GPUs for Alan Wake 2 (2026): Picks by Path Tracing Tier
Best GPUs for Alan Wake 2 in 2026, picked by Path Tracing tier — from the 1080p mesh-shader floor to 4K Full PT with DLSS 4 Multi Frame Gen.
May 15, 2026

Best GPUs for Stalker 2: Heart of Chornobyl (2026): Picks by Monitor Tier
Pick a GPU for Stalker 2 by your monitor tier. Tier-by-tier picks from a 1080p VRAM-safe floor through a 4K native flagship, with DLSS 4 and FSR 4 framing.
May 15, 2026

Best GPUs for Resident Evil Requiem (2026): Path Tracing & DLSS 4 Picks
Best GPUs for Resident Evil Requiem in 2026, picked by Path Tracing tier — from 1080p RT entry to 4K Full PT with DLSS 4 Multi Frame Gen.
May 22, 2026

Is 650W Enough for an RTX 5070? Verdict for 6 Builds (2026)
Is a 650W PSU enough for an RTX 5070? Yes for 4 of 6 common builds, matching NVIDIA's 650W spec. See which CPUs need 750W and the ATX 3.1 PSU worth buying.
Oct 18, 2026

Best GPUs for Final Fantasy XVI PC (2026): 5 Picks
Best GPU for Final Fantasy XVI on PC, tiered by native 60 fps vs frame-gen 60 at 1080p, 1440p and 4K, with FPS estimates for all 5 picks and the VRAM you need.
Oct 18, 2026